mån 10 jul 2023, 02:28#805784Hello! When using a clearing saw, I frequently experience shoulder ache. Is there anyone here that knows how to properly set up a clearing saw harness? Thank you ahead of time!
Motorsåg och handhållet
How to properly set up a clearing saw harness?
TS
mån 10 jul 2023, 05:37#805785A photo or brand/model of the one you have would promote getting guidance.
There are instructions to find somewhere as well as at the same time there are better and worse designs. Otherwise, generally speaking. Where it cuts deepest in the flesh is where to extend the webbing to find balance near you centerline.
And still there is 10kg/25lb you need to take and it wont levitate.
Myself like the older and less over-engineered ones over the modern, which I find over-complicated.
There are instructions to find somewhere as well as at the same time there are better and worse designs. Otherwise, generally speaking. Where it cuts deepest in the flesh is where to extend the webbing to find balance near you centerline.
And still there is 10kg/25lb you need to take and it wont levitate.
Myself like the older and less over-engineered ones over the modern, which I find over-complicated.
Re: How to properly set up a clearing saw harness?
mån 10 jul 2023, 11:28#805814If you have a more advanced harness, you should aim for 50% weight on your hips and 50 % on your shoulders, there both shoulders cary equal weight.
For forestry clearing, the hitch should be about 10-15 cm below your waist, and the blade be parallell to the grund, about 20-30 cm above the ground.
/Niklas
For forestry clearing, the hitch should be about 10-15 cm below your waist, and the blade be parallell to the grund, about 20-30 cm above the ground.
/Niklas
/Niklas
Hej Gäst! Jag heter Fredrik och driver denna sajt. Jag skulle gärna vilja tipsa dig om hur du kan få ut mer av skogsforum. Klicka på de knappar som passar dig här intill (minifönster öppnas).