Skotare

Osa 250 no drive to rear wheels.

24 inlägg 6572 visningar 4 följer Svara, dela mm...   
Avatar Fallback

Osa 250 no drive to rear wheels.

ELFINWOOD  
#328004 Osa 250 problem, no drive to rear wheels! Had a driver on it yesterday as i was busy winching and this morning he say it gets stuck easy? So had a quick look and there is no drive at the rear wheels, rear prop is turning and taking drive into the rear diff, so halfshafts or drive chain problem? He said he never heard any noise. Any advise or diagrams or parts, so now i,ve got 2 forwarders that only drive on the front bogie1 At least i have the parts to sort out the Bruunett.



   TS
Rottne skotare
Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Åke Nilsson  
#328511 check if the splines in shaft between front and back section is broken.

Avatar Fallback

Re: Osa 250 no drive to rear wheels.

ELFINWOOD  
#328556 Thank you for your reply, the problem was the hex head bolt in the outer end of the halfshaft that holds it in to the drive sprocket, it had come loose allowing the halfshaft to slide out of the sprocket in the bogie, so i pulled the shaft back in to place and tighten the hex head bolt, It took ten minutes to do and no cost :lol:

   TS
Avatar Fallback

Re: Osa 250 no drive to rear wheels.

åberg  
#328564 Congratulations then! :smile:

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Krzysiek  
#697766 Witam mam problem z osa 250 zacia się ktorys elektro zawór od kierowania dzojstikiem non stop jest zalonczony nie mogę odpalić maszyny bo go czy a olej panowie pomoże ktoś 🤔

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

skogsjan695xl  
#697768
Krzysiek skrev:Witam mam problem z osa 250 zacia się ktorys elektro zawór od kierowania dzojstikiem non stop jest zalonczony nie mogę odpalić maszyny bo go czy a olej panowie pomoże ktoś 🤔


English please.

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Krzysiek  
#697892 Hello, I have a problem with the wasp 250 jammed any solenoid valve from the joystick turn I can not start the machine because it holds oil, how to unlock which section on the manifold

Avatar Fallback

Re: Osa 250 no drive to rear wheels.

Simba  Firar 10 år som aktiv medlem på skogsforum! 
#697896 Plug the 1/4 hose marked "ls"
Goes from the hydraulic valve and control the hydraulic pump
It is the only 1/4 hose at the pump

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Krzysiek  
#697899 Sterowanie było ok przelonczylem na sterowanie na dżojstik i maszyna skręciła i dalej chcę kręcić elektrozawor jest wlonczony ale nie wiem który to jest?

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Krzysiek  
#697901 The control was just switched to the joystick control, you started to control and automatically the machine itself turned max and I still want to turn which electro valve to disconnect it, I can not start the machine no

Avatar Fallback

Re: Osa 250 no drive to rear wheels.

Simba  Firar 10 år som aktiv medlem på skogsforum! 
#697910 Crane or drive?

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Krzysiek  
#697935 The crane itself turns left approx

Användarvisningsbild

Re: Osa 250 no drive to rear wheels.

Krzysiek  
#697936
Krzysiek skrev:The crane itself turns left approx

Drive

Avatar Fallback

Re: Osa 250 no drive to rear wheels.

Simba  Firar 10 år som aktiv medlem på skogsforum! 
#698120 At drivepump 2 Hirchmanconnectors unlock then try again
If machine still moves or you vant start pump is broken

Avatar Fallback

Re: Osa 250 no drive to rear wheels.

AKKAMAAN  
#698146 Jaki jest numer seryjny maszyny?

What is the serial number of the machine?

Vad är det för tillverkningsnummer på maskinen?

Fredrik Reuter
Hej Gäst! Jag heter Fredrik och driver denna sajt. Jag skulle gärna vilja tipsa dig om hur du kan få ut mer av skogsforum. Klicka på de knappar som passar dig här intill (minifönster öppnas).
Liknande Trådar