Sida 1 av 2

Osa 250 no drive to rear wheels.

Postat: ons 29 apr 2015, 17:23
av ELFINWOOD
Osa 250 problem, no drive to rear wheels! Had a driver on it yesterday as i was busy winching and this morning he say it gets stuck easy? So had a quick look and there is no drive at the rear wheels, rear prop is turning and taking drive into the rear diff, so halfshafts or drive chain problem? He said he never heard any noise. Any advise or diagrams or parts, so now i,ve got 2 forwarders that only drive on the front bogie1 At least i have the parts to sort out the Bruunett.

Re: Osa 250 no drive to rear wheels.

Postat: sön 03 maj 2015, 19:56
av Åke Nilsson
check if the splines in shaft between front and back section is broken.

Re: Osa 250 no drive to rear wheels.

Postat: mån 04 maj 2015, 09:26
av ELFINWOOD
Thank you for your reply, the problem was the hex head bolt in the outer end of the halfshaft that holds it in to the drive sprocket, it had come loose allowing the halfshaft to slide out of the sprocket in the bogie, so i pulled the shaft back in to place and tighten the hex head bolt, It took ten minutes to do and no cost :lol:

Re: Osa 250 no drive to rear wheels.

Postat: mån 04 maj 2015, 12:19
av åberg
Congratulations then! :smile:

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 08:03
av Krzysiek
Witam mam problem z osa 250 zacia się ktorys elektro zawór od kierowania dzojstikiem non stop jest zalonczony nie mogę odpalić maszyny bo go czy a olej panowie pomoże ktoś 🤔

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 08:32
av skogsjan695xl
Krzysiek skrev:Witam mam problem z osa 250 zacia się ktorys elektro zawór od kierowania dzojstikiem non stop jest zalonczony nie mogę odpalić maszyny bo go czy a olej panowie pomoże ktoś 🤔


English please.

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 17:36
av Krzysiek
Hello, I have a problem with the wasp 250 jammed any solenoid valve from the joystick turn I can not start the machine because it holds oil, how to unlock which section on the manifold

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 17:42
av Simba
Plug the 1/4 hose marked "ls"
Goes from the hydraulic valve and control the hydraulic pump
It is the only 1/4 hose at the pump

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 17:51
av Krzysiek
Sterowanie było ok przelonczylem na sterowanie na dżojstik i maszyna skręciła i dalej chcę kręcić elektrozawor jest wlonczony ale nie wiem który to jest?

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 17:55
av Krzysiek
The control was just switched to the joystick control, you started to control and automatically the machine itself turned max and I still want to turn which electro valve to disconnect it, I can not start the machine no

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 18:22
av Simba
Crane or drive?

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 19:40
av Krzysiek
The crane itself turns left approx

Re: Osa 250 no drive to rear wheels.

Postat: sön 31 jan 2021, 19:42
av Krzysiek
Krzysiek skrev:The crane itself turns left approx

Drive

Re: Osa 250 no drive to rear wheels.

Postat: mån 01 feb 2021, 19:49
av Simba
At drivepump 2 Hirchmanconnectors unlock then try again
If machine still moves or you vant start pump is broken

Re: Osa 250 no drive to rear wheels.

Postat: mån 01 feb 2021, 22:57
av AKKAMAAN
Jaki jest numer seryjny maszyny?

What is the serial number of the machine?

Vad är det för tillverkningsnummer på maskinen?